Features & Benefits
$54.00
| Cable & Hose Protectors | |
|---|---|
| Length (mm) | 990 |
| Width (mm) | 210 |
| Height (mm) | 45 |
| Number of Channels | 1 |
| Channel Width (mm) | 30 |
| External Dimensions | |
$61.00
| Cable & Hose Protectors | |
|---|---|
| Length (mm) | 1000 |
| Width (mm) | 250 |
| Height (mm) | 45 |
| Number of Channels | 2 |
| Channel Width (mm) | 30 |
| External Dimensions | |
$85.00
| Cable & Hose Protectors | |
|---|---|
| Length (mm) | 900 |
| Width (mm) | 300 |
| Height (mm) | 45 |
| Number of Channels | 3 |
| Channel Width (mm) | 30 |
| External Dimensions | |
$120.00
| Cable & Hose Protectors | |
|---|---|
| Length (mm) | 1000 |
| Width (mm) | 300 |
| Height (mm) | 45 |
| Number of Channels | 4 |
| Channel Width (mm) | 35 |
| External Dimensions | |
$135.00
| Cable & Hose Protectors | |
|---|---|
| Length (mm) | 900 |
| Width (mm) | 500 |
| Height (mm) | 55 |
| Number of Channels | 5 |
| Channel Width (mm) | 42 |
| External Dimensions | |
Please contact us for bulk quantity purchases.
Frequently Asked Questions
Open the hinged lid, it swings fully clear of the channel without needing to be removed. Insert cables one at a time, keeping each cable or hose in its own dedicated channel. Sensitive or thinner cables should be placed nearest the hinge side for added protection. Avoid overloading channels; each channel is designed to accommodate one cable or hose at a time. Once loaded, close and secure the lid. The process is a single-operator job and takes only minutes.
Yes. Both the rubber base ramps and the yellow lid are profiled with a textured, non-slip surface. This provides adequate grip for pedestrian foot traffic under typical site conditions, including when wet or dusty. The tapered ramp profile on either side of the guard also eliminates the abrupt step edge that would otherwise constitute a separate trip hazard.
The standard units are designed as free-standing, repositionable protectors — their mass and rubber base friction provide adequate stability under normal traffic conditions without anchoring. For permanent or semi-permanent installations where additional security is required (for example, in high-traffic forklift lanes), some models include pre-formed anchor holes to allow bolt-down fixing. Contact Astrolift to confirm bolt-down suitability for your selected model.
Each section is fitted with heavy-duty T-shaped interlocking connectors on both ends — a male profile on one end and a female receptor on the other. Units simply push together and lock without any tools or additional hardware. This modular approach means you can extend the cable crossing to whatever length your site demands. Sections from the same model line are directly compatible with one another.